Skip to product information
1 of 3

Wittworkshop

Large Bevel Router Jig Plans — Digital Download

Large Bevel Router Jig Plans — Digital Download

Regular price $25.00 USD
Regular price $45.00 USD Sale price $25.00 USD
Sale Sold out

Cut a massive, furniture-grade underbevel using a trim router and a simple plywood jig.

These detailed digital plans show you how to build the same large bevel router jig featured in the Wittworks round walnut table video. Follow the included quick-build dimensions or customize the jig for your own tabletop size and bevel profile.

Digital download only. No physical product will be shipped.


Create a Massive Underbevel Without a Massive Router Bit

A deep underbevel can make a thick tabletop appear lighter, thinner, and considerably more expensive.

The problem is that most standard chamfer bits cannot create a bevel this wide—and the oversized bits that can are expensive, intimidating, and often too large for a trim router.

This shop-made jig uses an angled router platform attached to a rotating trammel. As the jig pivots around the center of a round tabletop, your trim router slides across the platform and gradually cuts a wide, consistent underbevel.

You can build it primarily from plywood or MDF scraps, adjust it for different tabletop sizes, and adapt it to fit most trim-router bases.

Two Ways to Build It

Copy the Wittworks Jig

The quick-build guide includes the dimensions used to create approximately:

  • 3" wide underbevel
  • 1" vertical drop
  • 1/2" remaining edge
  • On a 48" round tabletop approximately 1-1/2" thick

Customize It for Your Project

The extended plans show you how to calculate and adjust the jig based on:

  • Your tabletop diameter or radius
  • Your desired bevel width
  • The amount of material removed at the edge
  • Your tabletop thickness
  • Your desired remaining edge thickness
  • The dimensions of your router base

No complicated angle calculations or bevel gauge are required. The plans show you how to lay out the slope at full scale using the bevel width and height you want.

What’s Included

  • 26-page illustrated digital plan set
  • Quick-build guide using the dimensions from the Wittworks table
  • Full materials and parts list
  • Imperial and metric measurements
  • Detailed diagrams for the trammel, router platform, guides, and wedges
  • Instructions for sizing the jig to fit different round tabletops
  • Full-scale wedge and bevel layout method
  • Router-platform and guide setup instructions
  • Step-by-step assembly guidance
  • Instructions for safely using the jig with light, overlapping passes
  • Tips for removing waste before using the jig
  • Guidance for adapting the jig to different trim-router bases
  • Bonus section covering how the same concept can be adapted for straight-edged tabletops

Router Compatibility

These plans were designed around a compact trim router equipped with the Wittworks wittPlate, which measures approximately 5-1/2" × 7-1/4".

However, the jig can be adapted to a stock trim-router base or another accessory plate. Use your actual router base to position the guides and confirm that it remains supported throughout the cut.

A wittPlate, trim router, router bit, and physical jig are not included.

What You’ll Need

  • Compact trim router
  • Suitable spiral router bit. We used this one.
  • 1/2" plywood or MDF for the trammel and platform
  • 3/4" plywood or hardwood for the guides and wedges
  • Screws and wood glue
  • Optional CA glue and activator
  • Drill
  • Jigsaw or another suitable tool for cutting the slots
  • Basic measuring and woodworking tools

Important Download Information

This listing is for a digital PDF plan set only. No physical jig, router plate, router bit, materials, or tools will be shipped.

After purchase, you’ll receive an email with immediate access to download the plans.

Because this is a digital product, all sales are final and the purchase is non-refundable. These plans are licensed for use by the original purchaser and may not be copied, reposted, distributed, or resold.

Always read and follow the safety instructions supplied with your router and router bit. Test your setup on scrap material before cutting your finished tabletop.

View full details

Customer Reviews

Customer photo review of Workbench Digital Plans

This works great as an outfeed table and assembly bench. I still have some work to do with dog holes, dog holes and drawers. The plans were easy to understand and of course the video was helpful. Thank You!

Workbench Digital Plans

The bench is exactly what I was looking for, although I will probably make some modifications and incorporate my tablesaw into the build. I will also increase the size to 4' x 8' if I include the tablesaw. I will upload photos when complete.

Workbench Digital Plans

I was excited to build the Multi-Purpose workbench plans. I was planning t adjust the dimensions to 7' 6" x 3'6" and use a MDF Torsion box for the top. As I was looking through the plans, since I was making adjustments, I decided to 3D print the main parts to see if I made any mistakes before machining the wood frame. I saw an issue on page 7 of 35, figure 5, item Lower Leg B (x2). I used the STL file. The visual does not match the cutouts on the STL file that I actually 3D printed from the imperial version. Maybe I am mistaken but... Other than that, I am moving forward. I bought the deluxe version of casters and leveler feet you recommended so let's see how it goes :) Thank you for your videos, they are entertaining and interesting. the Lord bless...

Workbench Digital Plans

Plans exactly as advertised and had cut sheets and detailed instructions.

Workbench Digital Plans

I haven't had a chance to use the plans yet. However, the plans appear to be clear, concise, and easy to work with.

Workbench Digital Plans

Very nice plan set only thing that would make it better would have all the sub attachments under a single PDF File. Would make it much easier to print

Workbench Digital Plans